Page 1 - FRE Composites | Specifications | Radius Bell Ends
P. 1
RadFRE termINSTRUCTIONS FORRADIUS BELL ENDSINSTRUCTIONS FORRADIUS BELL ENDSius Bell EndsComposites ha designed the Radius75 Wales, Saint-André-d’Argenteuil, Québec, CANADA J0V 1X0 | +1 450 537-3311 | Fax: +1 450 537-3415 which ha6s0 Graeenhsormn Dorivoet, hPuebblo,eCvoleorlaldeo,d8100r4a, dUSiuA |s+1 f7o19r565F-R33E11 | Fax: +1 719 564-3415 Toll free: +1 888 849-9909 | frecomposites.comBell EndThe bevelled radius feature provides a smooth surface (rather than rough, cut edges) over which the cable passes when it isinations to minimize cable jacket damageF1RSTIN THERADIUS BELL ENDSFIELD®pulled into the conduit. The bevelled radius also minimizes elongation of the cable caused by frictional drag between cableand conduit interface.Conduit terminations to minimize cable jacket damage at manholesFRE Composites’ has designed the Radius Bell End which has a smooth bevelled radius for FRE or vaults.®The Radius Bell End has an excellent frictional fit to FRE® Conduit which ensures a tight seal between the conduit, Radius Bell End and the vault wall.The bevelled radius feature provides a smooth surface (rather than rough, cut edges) over which the cable passes when it is pulled into the conduit. The bevelled radius also minimizes elongation of the cable caused by frictional drag between cable and conduit interface.In addition, when encased in concrete, the Radius Bell End’s special reinforcing ribs provide excellent adhesion for a compTlheeteRlaydiufisnBieslhl Eend,hpasearnmeaxcneellenntt tfreicrtmionianla titonF.RE® Conduit which ensures a tight seal between the conduit, Radius Bell End and the vault wall.The RInaadiduitsionB,ewlhleEnnedncsa,seind inIPcSoncsriezte,sthferRoamdiu3⁄4s B”el(l End’smsmpe)ciatlore8in”for(c2in0g3ribms pmro)vidaenedxcienlleInDt adshizeseiosnffroor ma co2m”pl(e5tely mnimsh)edt,ope6rm”anent termination. made of a fiberglass resin compound, compression moulded to tight tolerances, and has a service temperatureThe Radius Bell Ends, in IPS sizes from 3/4” (21 mm) to 8” (203 mm) and in ID sizes from 2” (53 mm) to 6” (155 mm) are made of a berglass resin compound,-65 oF to 266 oF (-54 oC to 130 oC). Over these temperature extremes and variations, the Radius Bellcompression moulded to tight tolerances, and has a service temperature range of -65 °F to 266 °F (-54 °C to 130 °C). Over these temperature extremes andEnd has impact and compressive strength .In addition, thevariations, the Radius Bell End has excellent impact and compressive strength consistent with conduit mechanical properties. In addition, the Radius Bell End isRadius Bell End is virtually impervious to rot, corrosion and and is especially suitable for areas of highvirtually impervious to rot, corrosion and chemicals and is especially suitable for areas of high alkaline contents.alkaline cont .RADIUS BELL ENDAssembly of the Radius Bell End to FRE® Conduit is easy. SimplyAssembly of the Radius Bell End to FRE ®Conduit is easy. Simply push- t the Radius Bell End over the conduit male end.push the Radius Bell End over the conduit This document is the property of FRE Composites (2005) Inc. (“FRE Composites”). It shall not be used, reproduced, copied or transmitted to other persons without written authorization.composite.com
 |
1 |  |
