RESOURCES

No matter the size, the complexity or the location, we’ve got the right conduit system products for your needs.

    THE PHENOLICS

  • BREATHSAVER® SW

    Using a phenolic resin based matrix, it is designed to provide transit, utilities and industry with a non-metallic corrosion resistant, low smoke, non-toxic conduit system that is suitable for high temperatures installations.

  • BREATHSAVER® XW

    A Class 1 Division 2 UL 2196 -2 Hours Fire Certified following F.H.I.T 25 C with Prysmian. This phenolic resin based matrix product line meets the most stringent industry requirements for safety. Also the only certified product under UL’s 2516 both vertically and horizontally.

    THE ELBOWS

  • IPS ELBOWS W/PVC COUPLINGS

    We offer all our elbows with factory ends, PVC sch.40 couplings or female thread in all different combinations. Our fiberglass elbows offer a readily available, no burn-through, light weight, corrosion resistant and with a low coefficient of friction solution to your raceways.

    THE ADHESIVES

  • Ambient Temperature Adhesive Kit (20-0164)   

    For use above 54°F (12°C) with static mixer tip 20-0166 (Green). Kit requires the use of our dual cartridge applicator (20-0165).

    Cold Weather Adhesive Kit (20-0163)   

    For below 54°F (12°C) with static mixer tip 20-0162 (Orange). Kit requires the use of our dual cartridge applicator (20-0165).

    Manual Adhesive Kit (40-0161)   

    Works the same way as 20-0163 & 20-0164 but without the applicator (20-0165). 2 Parts Epoxy Kit with a manual application (Brush).

    Adhesive Kits – Usage Guidelines (20-0163/20-0164/40-0161)   

    Working Time

INSTRUCTIONS

Split Conduit  

trisealTM  

Radius bell ends